Isys iTerra Elite II Color LED Plotter Manuel d'utilisateur télécharger pdf (Page 32)

June 2011: Revision 002 32

STEP 10

STEP 11

Replace fuser unit into the machine and move

locking levers (e) toward the rear of the machine.

Starting with the cyan image drum unit nearest the fuser,

replace the four image drums into the drum cavity,

making sure to locate them in the correct order.

STEP 12

Open the rear exit tray (h) and check for sheets of

paper in the rear path area (i), pull out any sheets

found in this area.

STEP 13

STEP 14

If the sheet is low down in this area and difficult to

remove, it is probably still gripped by the fuser. In

this case raise the top cover, reach around and

press down on the fuser pressure release lever (d).

Pull down the MP tray using the depressions. Lift the

front cover release lever and lower the front cover.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 42 43

Pas de commentaire

Isys iTerra Elite II Color LED Plotter Manuel d'utilisateur Page 32